Push the wiper forward until you feel a ‘click.’ Press the j-hook wiper arm into the hole in the wiper blade. Line up the wiper arm with the new blade. With the locking clip open, inspect the hole where you will insert the j-hook wiper arm. Locate the locking clip on the top of the connector. There are several different types of wiper arms.
Michelin guardian hybrid wiper blades honda accord 2010 how to#
We’ll now go over how to install the new blades onto the wiper arms. Since it is spring-loaded, it has the potential to impact the windshield and leave a nick or a crack! If you are worried about it, put a towel on the windshield as an added layer of protection. Be careful not to press this arm toward the windshield at this point. This now leaves the wiper arm j-hook exposed. The way it works is, you press the tab, then slide the blade downward until it is free of the wiper arm. The hardest part is finding the tab that you need to press in order to release the old blade. Pull the wiper arm up and away from the windshield. Removing the old wiper blades is pretty straightforward. Keep in mind that often the two blades (driver’s and passenger’s side) are different lengths, so if you take this approach, be sure to measure both. The connections are fairly standardized these days, so just get the lengths correct, and you have a very good chance of selecting the correct ones. If you are replacing blades on a 2002-2007 Accord, then you need a 26″ (driver’s side) and 18″ (passenger’s side), and the following part numbers will work for you:Īnother method is to measure the blades. Okay, let’s get started! Selecting the Correct Windshield Wiper Blades Selecting the Correct Windshield Wiper Blades.In this guide, we are going to cover these steps: The following picture guide goes step-by-step on replacing the windshield wiper blades on a Honda Accord.Ĭheck this link for instructions on adding windshield washer fluid.
0 kommentar(er)
